I have been a fan of SG Wizard builds for quite some time now, and also a fan of the developer (Gerry). Since I was not able to make use of the Wizard builds on my Kodi 17 Krypton setup, I wanted to share these builds to the masses. After trying to install the Wizard builds on a few different Kodi flavors, I have found the easiest method to install SG Wizard builds on Kodi (17 Krypton). The method is outlined below in the steps.
When you set up a Kodi build, you typically have to set up an account for the developer, which involves emailing them the credentials, and waiting for them to email back, along with any other pertinent information to setup your build.
This guide provides detailed instructions on how to install SG Wizard builds on Kodi 18 Leia. These builds are supported on all Kodi compatible platforms including Amazon Fire TV, FireStick 4K, Fire Stick, Android, iOS, Mac, Windows, etc.
The SG Wizard builds are made by the same developers who gave us the EzzerMac builds. However, instead of creating the SG wizard builds at the same time as the other EzzerMac builds (available through the EzzerMac wizard), the developers decided to put them in a separate wizard.
Several constructs have been taken offline recently. Fortunately, there are also many new ones. SG Wizard builds are a great addition to our list of the best Kodi builds. You will find many attractive and functional buildings.
SG Wizard does not have a compilation for Kodi 17.6 Krypton. You will only find builds for Kodi 18 Leia.
Let’s start with the installation process.
Attention Kodi Users: Please Read Before Continuing
Kodi addons / modules offer unlimited streaming content, but can also get you in legal trouble if you get caught watching movies / TV shows / sports for free. Kodi users are strongly advised to always connect a VPN when streaming online. A good Kodi VPN can hide your identity, bypass government surveillance, block content, and ISP throttling (which also contributes to buffer-free streaming).
I use ExpressVPN, which is the fastest and most secure VPN. It is very easy to install on any device, including the Amazon FireStick. Get 3 months free and save 49% on annual plans. There is also a 30 day money back guarantee. If you are not satisfied, you can always ask for a refund.
Click HERE to get 3 months free and save 49% on ExpressVPN.
Read: How to install and use VPN for Kodi
To Install Sg Wizard Builds on Kodi
This process has two main parts:
– Allow unknown sources
– Installing SG master assemblies
Let’s go through them one by one.
Please click here to read our disclaimer before proceeding.DisclaimerThis manual is for training purposes only. FireStickTricks does not own, host, operate or distribute streaming applications/add-ons/IPTV. Some of these services are offered by third parties and may allow unauthorized access to copyrighted content. We do not tolerate access to pirated content or copyright infringement. We are not affiliated with these services and do not endorse them in any way. We also do not control the legal status of a streaming service. The end user is responsible for the content accessed through these unreliable services.
Allow unknown sources – Condition
This is a requirement for installation of all third-party builds, not just SG Wizard Kodi builds. Follow the steps below:
– After starting the Kodi application, you will see the main window. In the top right corner, find the gear icon and click it. The parameters are open
– In the Settings window, go to System on Kodi Leia 18
– You should now see the following window. Select Add-ons from the left menu bar
– Then click Unknown Sources on the right side of this window.
Message: Press only if this option is disabled or not.
– Kodi will warn you once before enabling this option. Press Yes.
SG Wizard assemblies are safe
We now move on to the next part of the process.
Install SG Wizard Kodi Builds
Here are the steps to follow to install the SG Wizard version on Kodi:
1- In the main window of the Kodi application, go back to Settings.
2- In the settings, tap File manager
3- Now you should see the Add Source option (on both sides of the window)
4- In this window, we need to replace <None> with the source URL. So press <No>.
5- Now you will see a window where you can enter the URL http://www.ezzer-mac.com/sgwizard.
Before clicking OK, check that the URL has been entered correctly.
6- Highlight or select now the field where you want to enter the source name.
You can enter any name. In fact, you’ll find that it’s already filled with sgwizard
Let’s leave it at that.
7- Now go back to the settings window by pressing the back button/key or from the main Kodi window.
This time, in the settings window, select Add-ons
8- Now open Installer from the zip file
9- In this pop-up window, you should see sgwizard or the name you entered for the resource in step 6.
Go ahead and click it.
10- Here is the zip file you need to click on : plugin.program.sgwizard-x.x.zip
Click on the file, even if the version number is different from the one you see in the picture below
11- SG Wizard installation takes a few minutes. A message in the top right corner confirms the installation.
12- Shortly after installing the wizard, you will see this pop-up window. Press the back button and cancel the
13- Now we see this pop-up window. It has a Build Menu button. You can click on it and go directly to the list of assemblies in the SG Wizard (and skip step 16).
I click ignore to show how to switch from the main Kodi window to the build list.
14- Press the Back button until you are back in the main window of Kodi. There, go to Add-ons > Program Add-ons and click on the SG Wizard icon.
15- Then click on Buildings
16- Here’s a list of SG wizard constructs. Select the version you wish to install. For the demonstration I chose the first option of TheDarkBuild
Message: If TheDarkBuild cannot be installed, please select another build from this list of Kodi builds. Moreover, the constructions are constantly updated. If you do not see any of the assemblies as shown, select one of the available assemblies.
17- In the next window, click Fresh Install (this will allow you to reset Kodi to its default settings before installing the build. I recommend this option).
You can also choose the default installation if you wish
18- Click on Next to confirm
19- The card will now boot up and then install itself. It’ll only take a few minutes. Wait!
20- After installing the version, Kodi may automatically close or you may be asked to force the version to close.
Now you can open Kodi again and use the
Before you start streaming video with Kodi addons or modules, I want to warn you that everything you stream on Kodi is visible to your ISP and the government. This means that streaming copyrighted content (free movies, TV shows, live broadcasts and sports) can lead to legal problems.
Fortunately, there is a reliable way to hide all your streaming activities from your ISP and the government. All you need is a good VPN for Kodi. A VPN masks your original IP address and helps you bypass Internet monitoring, ISP restrictions, and geographic content limitations.
Personally, I use and recommend ExpressVPN, the fastest and most secure VPN. It is compatible with all types of applications and streaming devices.
OPINION: We do not encourage copyright infringement. But what if you accidentally upload content from an illegal source? It is not always easy to distinguish between a legal and an illegal source.
So before you start streaming on Kodi, read here how to get VPN protection in 3 easy steps.
Step one: Purchase your ExpressVPN subscription HERE. It comes with a 30-day money-back guarantee. This means you can use it for free for the first 30 days. If you are not satisfied with the service (which is unlikely), you can ask for a full refund.
Step two: Click HERE to download and install the ExpressVPN application on your streaming device. If you are using a FireStick, I have included the exact steps below, starting with step 4.
Step three: Click on the power icon to connect to the VPN server. That’s it. Now your connection is secure with the fastest and best VPN for Kodi.
The steps to install Kodi VPN on Fire TV devices are described below. If you have other broadcast devices, follow steps 1 to 3 above.
Step four: Sign up for ExpressVPN HERE (if you are not already a subscriber).
Step 5: Go to the Fire TV Stick home screen. Click the Search button and then the Search option (see figure below).
Step six: Type expressvpn into the search bar and select when it appears.
Seventh step: Click on the Download button.
Step 8: Open the ExpressVPN application and log in using the username and password you created when you purchased your ExpressVPN subscription
Step 9: Click on the power icon to connect to the VPN server. That’s it. Now your FireStick is protected with the fastest VPN.
How to use SG Wizard Kodi Builds: Quick Overview
The DarkBuild version we installed and other versions of SG Wizard have a slightly different layout than the normal versions. Your main menu is docked at the top of the screen, not in the middle like other Kodi builds.
After installing the SG wizard version, Kodi stops (or you have to force close it). The build will be loaded the next time you open Kodi.
When you launch a version of Kodi for the first time, you should give it a few minutes to adjust settings and update addons. This process can take 10 to 12 minutes. It is important that you complete these in order for the assembly to work properly.
This is the SG Wizard TheDarkBuild startup screen. As I said before (and as you can also see), the main menu bar is at the top
Just below the submenu, video add-ons are listed (only if you selected the Streaming category in the main menu). Below the list of add-ons is a collection of thematic/mode content related to the selected category.
Here is a picture of the Integra Blue assembly from SG Wizard. It has a different color theme, but the layout is pretty much the same.
SG Wizard builds include popular and very popular Kodi addons including DejaVu, Venom, Exodus Redux, The Magic Dragon, etc.
SG Wizard Kodi built from the developers of Ezzer Mac’s Wizard. However, the developers have decided to make the SG Assistant builds available through a different assistant to keep things more organized.
SG Wizard has a small but good collection of easy and useful constructs. These builds work seamlessly on all supported Kodi devices, including the FireStick. Because the layout is different, you get a fresh feeling. The builds also include some of the most popular addons for Kodi. SG Wizard builds are worth a try.
Install No Limits Magic build
Install Titanium build
Install Diggz Xenon build
We do not check the legality or safety of any add-ons, applications or services mentioned on this website. Furthermore, we do not promote, publish or link to copyrighted feeds. We strongly condemn piracy and urge our readers to avoid it at all costs. Any mention of free streaming on our website refers only to non-copyrighted public domain content. Read our full disclaimer.
We are a reader-supported blog. If you purchase an item through the links on our website, we may receive a commission. Read more
We Need Your Support
Frequently Asked Questions
How do I install wizard on Kodi?
To install the Wizard on Kodi, you need to install the Wizard Kodi addon. How do I install the Wizard Kodi addon? To install the Wizard Kodi addon, you need to go to the Kodi addon repository and install the Wizard addon.
What is SG wizard?
SG wizard is a tool that allows you to search for items in your Steam inventory.
How do I install Indominus builds wizard?
To install Indominus builds wizard, just download the Indominus builds wizard zip file and extract the contents to your computer. Next, open the build.xml file in your text editor of choice and replace the values in the tag with your own.